ESP8266 ATmega2560 MEGA Dev Board R3 32Mb WiFi Bluetooth IoT
Price in Sri Lanka

The MEGA + WiFi R3 is a powerful, integrated development board that combines the massive I/O capabilities of the ATmega2560 with the wireless connectivity of the ESP8266 on a single PCB. It is an ideal "all-in-one" solution for complex IoT projects that require high pin counts and robust WiFi performance without the clutter of external modules and jumper wires.

Specifications

• Microcontrollers: ATmega2560 (8-bit) and ESP8266 (32-bit).
• WiFi Flash Memory: 32Mb (4MB).
• USB-to-Serial: CH340G (Requires CH340 driver installation).
• Operating Voltage: 5V (USB) or 7V–12V via DC Jack.
• Digital I/O Pins: 54 (15 provide PWM output).
• Analog Input Pins: 16.
• ESP8266 Antenna: Onboard PCB antenna with a socket for an external IPX antenna.

DIP Switch Configuration

The board features a central 8-position DIP switch that controls how the USB, ATmega2560, and ESP8266 communicate with each other.

Special Solution Mode

USB <-> ATmega2560 <-> ESP8266

To connect the USB to both the ATmega2560 and ESP8266 simultaneously (routing through Serial3/RXD3/TXD3):

• DIP Switches 1–4: ON
• DIP Switches 5–7: OFF
• SWITCH 2: To RXD3/TXD3

Features

• Integrated Design: Both modules share the same power supply and serial bus via the DIP switches, reducing space and power consumption.
• Massive I/O: Retains the full 54 digital and 16 analog pins of the Mega R3, making it capable of handling large sensor arrays and multiple actuators.
• Flexible Programming: You can upload sketches to either the Mega or the ESP8266 individually by adjusting the toggle switches.
• Toggle Switch (Mode Select): Includes a small toggle switch near the ESP8266 to switch between "Work" mode and "Upgrade" (Firmware) mode.

Common Applications

• Smart Home Hubs: Using the Mega to control relays and lights while the ESP8266 hosts a web dashboard.
• Industrial Monitoring: Reading dozens of industrial sensors and uploading the data to a cloud database.
• Robotics: Managing complex motor movements while receiving remote commands over WiFi.
• Data Loggers: Storing local data and syncing with an NTP server for precise time-stamping.

Usage Tips

• Driver Setup: Ensure you install the CH340 driver on your computer before attempting to upload sketches.
• Power Stability: When running both chips simultaneously, use the DC power jack (9V–12V) rather than USB alone to ensure stable current for the WiFi module's peaks.
• Switching Modes: Always power off the board or disconnect USB before flipping the DIP switches to prevent serial communication errors or short circuits.
• Serial Communication: When the Mega and ESP8266 are linked (DIP 1 & 2 ON), they communicate via Serial3 on the Mega.