Hantek 1008C 8 Channel USB PC Oscilloscope with CC-65 AC/DC Current Clamp and 2x HT201 20:1 Attenuator
Price in Sri Lanka

This package contains following devices specially designed for perfect vehicle testing.

1. Hantek 1008C 8 Channel USB PC Oscilloscope x 1
2. CC-650 Current Clamp x 1
3. HT-201 Attenuator x 2

1. Oscilloscope

Description

Hantek 1008C 8 Channel USB PC Oscilloscope is a specially designed oscilloscope for vehicle testing. It supports over 80 types of automotive diagnostic function (Ignition/Sensor/Bus detection/Performe/Starter and charging circuits etc...). Its Video Help Function provides the video help of diagnostic which can be watched online. The diagnostic results generates a diagnostic report which can be used to print or take screenshots by pushing a key with several methods to save the data. It can record waveforms for a long time and simulate camshaft and crankshaft signals. It can transmit signals through USB 2.0 interface and no extra power supply is needed.

Features

• Cost-effective Hantek PC USB 8CH Automotive Diagnostic Oscilloscope/DAQ/Programmable Generator: Highly efficient and cost -effective;
• 8 channels oscilloscope for vehicle testing;
• Auto Ignition Probe;
• 2.4MSa/s real time sampling rate, 12bit vertical resolution;
• spectrum analysis function;
• 10mV/div to 5V/div input sensitivity;
• DAQ card function;
• 8 channels programmable generator which can analog signals of crankshaft, camshaft, etc.

Functions

1. Vehicle Testing

• First Diagnosis: Intake manifold vacuum & ignition, Petrol fumes adjusting valve vacuum & ignition, Idle exhaust ignition, Starting exhaust ignition
• Ignition: primary and secondary
• Sensor: Air Flow Meter, Camshaft, Crankshaft, Distributor, Lambda sensor, Throttle position
• Bus Diagnosis: CAN bus data examine, CAN bus signal integrity, CAN bus LH long time acquisition, LIN bus
• Performer: Petrol/Diesel
• Starter and charging circuits

2. Oscilloscope

• 8 channels oscilloscope, 2.4MSa/s real time sampling rate
• 12 bits vertical resolution, spectrum analysis function

3. Programmable Generator

• 8 channels programmable generator
• Can analog signals of crankshaft, camshaft etc.

4. Others

• USB 2.0 interface plug and play, and no need extra power supply;
• More than 20 types of automatic testing function, a similar interface with benchtop oscilloscope, easy to use

Specification

2. CC-650 Current Clamp

Features

• AC/DC frequency range: Up to 400Hz
• Effective Measurement Range: 20mA to 650A DC
• It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms.
• Its current transducer is composed by permalloy and hall element, which linearly transform the AC or DC current to AC or DC current voltage. And if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms; If connect to a multimeter by banana type connector, you can obtain the current data

Application

• Power circuit measurement and malfunction analysis;
• Motor drive of frequency converter (or other electronics) measurement;
• Power electronics equipment measurement.

Specifications

• Efficient Measure Range: 1mV/100mA: 100mA to 20A, Multimeter Range is set to DC or rms AC 200mV. 1mV/1A: 1A to 200A, Multimeter Range is set to DC or rms AC 200mV; 200A to 650A, DC or rms AC 2V
• DC Current Accuracy: 0 to 650A, +/- (3% reading + 2A )
• AC Current Accuracy: 50Hz arrive at 400Hz
• Suitable Conductor Size: Max. 30mm/1.2" in diameter
• Low Electric Quantity Indicator: Red LED Lighting
• Operating Temperature: 0°C to 50°C and 70%
• Storage Temperature: -20°C to +70°C and 80%
• Output: BNC Plug

3. HT-201 Attenuator

Features

• This item has been designed to allow fuel injector and primary ignition waveforms to be measured using Hantek oscilloscope product
• Can allow oscilloscope to measure fuel injector and primary ignition waveforms
• Passive attenuator with 20:1 attenuation
• If input a 20V signal, it can output a 1V signal
• By using this item, oscilloscope can measure voltage higher than its range (*20V)

Specifications

• Attenuation: 20:1
• Bandwidth: 10MHz
• Input Resistance: 1.053M

Product link: Hantek 1008C