LiPower 11.1V 3500mAh 3S 60C Lipo Battery XT60 Plug
Price in Sri Lanka

The LiPower 11.1V 3500mAh 3S 60C Lipo Battery XT60 Plug is a high-discharge, premium lithium-polymer rechargeable battery pack engineered to deliver burst and continuous current for high-demand RC models, multirotor drones, aerial photography UAVs, and mobile robotics platforms. Configured in a 3-Series (3S1P) cell arrangement with a nominal voltage of 11.1V (12.6V fully charged), it features a high-rate continuous discharge rating of 60C (delivering up to 210A continuous output) with burst capability up to 120C. Terminated with heavy-duty 12 AWG high-strand silicone leads, a factory-soldered genuine XT60 high-current connector, and a standard JST-XH balance lead, this battery pack combines high energy density with low internal resistance to eliminate voltage sag during aggressive full-throttle maneuvers.

Specifications

• Brand / Series: LiPower High-Discharge Series
• Battery Chemistry: Lithium Polymer (LiPo)
• Cell Configuration: 3S1P (3 Cells in Series, 1 in Parallel)
• Nominal Voltage: 11.1 V DC (3.7 V per cell)
• Fully Charged Cutoff Voltage: 12.6 V DC (4.20 V per cell max.)
• Recommended Minimum Cutoff Voltage: 9.9 V to 10.5 V DC (3.3 V to 3.5 V per cell under load)
• Nominal Capacity: 3500 mAh (3.5 Ah / 38.85 Wh)
• Continuous Discharge Rating: 60C (Continuous Current: $3.5\text{ A} \times 60 = 210.0\text{ A}$)
• Peak Burst Discharge Rating: Up to 120C (~420 A for ≤ 5 to 10 seconds)
• Internal Resistance (IR): ≤ 2.5 mΩ to 4.0 mΩ per cell (Fresh pack at room temperature)
• Recommended Charging Current: 1C (3.5 A) for maximum cell longevity
• Maximum Fast-Charging Current: 2C to 3C (7.0 A to 10.5 A with active balance monitoring)
• Main Power Connector: XT60 Male Connector (Gold-plated brass bullet contacts, 60A continuous rating)
• Main Power Wire Gauge: 12 AWG Ultra-Flexible Multi-Strand Silicone Wire (~100 mm to 120 mm length)
• Balance Connector Type: Standard 4-Pin JST-XH Balance Plug (2.54 mm pitch)
• Balance Wire Gauge: 22 AWG Flexible Silicone Wire
• Operating Discharge Temperature: -20°C to +60°C
• Operating Charge Temperature: 0°C to +45°C
• Dimensions: Approx. 138 mm × 44 mm × 26 mm (L × W × H)
• Net Weight: Approx. 275 g to 295 g

Features

• High Sustained 60C Discharge: Engineered with low-impedance electrode foils and advanced electrolyte chemistry to sustain aggressive current draw without thermal throttling or extreme voltage sag.
• Pre-Soldered XT60 High-Current Plug: Outfitted with genuine nylon-shrouded XT60 connectors with gold-plated spring-loaded terminals, preventing high-resistance contacts and accidental reverse-polarity plugging.
• Ultra-Low Internal Resistance (IR): Balanced cell matching across all 3 cells guarantees uniform discharge curves and reduces heat generation during peak torque demands.
• Heavy-Gauge Silicone Wiring: High-strand 12 AWG silicone leads resist extreme temperatures up to 200°C without melting insulation, remaining completely flexible for routing in tight fuselage bays.
• Reinforced Outer Shrink Casing: Protected by heavy-duty PVC shrink wrapping with integrated aluminum/fiber protective end plates to guard against minor impact punctures and chassis vibration.

Common Applications

• RC Aircraft & Drones: Supplying power for 450-size to 550-size scale RC helicopters, 6-inch to 7-inch long-range FPV drones, and twin-engine RC fixed-wing model planes.
• High-Speed RC Vehicles: Powering 1/10 and 1/8 scale brushless RC touring cars, stadium buggies, rock crawlers, and fast-electric RC speedboats.
• UGV & Mobile Robotics Platforms: Providing an 11.1V high-capacity DC power bus for heavy-payload 4WD/6WD rovers, quadruped robots, and multi-axis robotic arms.
• High-Power DIY Electronics: Portable power source for high-output LED searchlights, mobile inverter systems, field radio communication rigs, and high-torque DC linear actuators.
• Airsoft Electronic Guns (AEG): High-capacity external battery stock configurations for upgraded, high-rate-of-fire custom airsoft builds.

Usage Tips

• Balance Charging Requirement (CRITICAL):
  • Always charge this battery using a dedicated microprocessor-controlled LiPo balance charger (such as an IMAX B6 or equivalent) via the JST-XH balance port.
  • Never charge using a simple non-balancing DC power supply. Balance charging ensures each individual cell tops out at exactly 4.20V (±0.01V), preventing individual cell overcharging which can cause thermal runaway and fire.
• Discharge Cutoff & Over-Discharge Prevention:
  • Never allow individual cell voltage to fall below 3.0V (9.0V total pack voltage) under any circumstances.
  • Set your speed controller (ESC) low-voltage cutoff (LVC) or telemetry alarm to 3.4V to 3.5V per cell (10.2V to 10.5V total). Over-discharging permanently destroys cell chemistry, spikes internal resistance, and causes irreversible cell swelling ("puffing").
• Safe Storage Voltage Protocol:
  • If the battery will not be used within 48 to 72 hours, put the pack into "Storage Mode" using your balance charger, setting it to 3.80V to 3.85V per cell (~11.4V to 11.55V total).
  • Storing a LiPo fully charged (4.20V/cell) or fully depleted (≤3.5V/cell) for more than a few days triggers internal chemical degradation, rapid capacity loss, and pouch expansion.
• Charging Safety Guidelines:
  • Always charge the battery inside a certified fireproof LiPo Safe Charging Bag placed on a non-flammable concrete or ceramic surface away from wood, carpeting, or paper.
  • Never leave charging LiPo batteries unattended. Disconnect immediately if the pack swells, emits smoke, or becomes hot to the touch (>45°C).
• Physical Handling & Inspection: Regularly inspect the battery for punctures, dented corners, frayed wiring, or cell bloating. If a pack is swollen or physically damaged after a high-impact crash, do not attempt to recharge it; discharge it completely in an outdoor saltwater bath before safe disposal.