eSUN Glass Fiber ePA-GF (Nylon Based) 3D Printer Filament 1.75mm 1kg
Price in Sri Lanka

Decriptions:

The printing consumables developed based on nylon 6/66 copolymers are added with 25% glass fiber, which greatly enhances the strength and rigidity of nylon, and can be used as a substitute for metal in many occasions; self-lubricating and wear-resistant properties make it suitable for printing gears; strong Toughness and impact resistance, can be used to print durable parts; high temperature resistance, heat distortion temperature up to 120 ℃; low shrinkage, not easy to warp and crack during printing, the surface of the printed items is matte and delicate.

Characteristics:

• Heat resistance
• High strength
• High rigidity
• High impact resistance
• Abrasion resistance
• High dimensional stability
• Matte surface effect
• Excellent printability

Filament Properties Table

• 3D PRINTING FILAMENTePA-GF
• Density(g/cm3)1.35
• Heat Distortion Temp(℃,0.45MPa)120
• Melt Flow Index(g/10min)1.45(220℃/2.16kg）
• Tensile Strength(MPa)76.93
• Elongation at Break(%)21.07
• Flexural Strength(MPa)77.75
• Flexural Modulus(MPa)1714.63
• IZOD Impact Strength(kJ/㎡)14.68
• Durability10/10
• Printability8/10

Recommended printing parameters

• Extruder Temperature(℃)260 – 300℃
• Recommended temperature：280℃
• Bed temperature(℃) 45 – 60°C
• Fan Speed 0%
• Printing Speed 40 – 100mm/s
• Heated Bed Optional
• Recommended Build SurfacesMasking paper, PVP solid glue, PEI

Note:

1. ePA-GF needs to be dried (70℃/＞12H) before printing to achieve the best printing effect. It is recommended to use it with the eBOX cartridge when printing.

2. The ePA-GF line has strong rigidity and is not easy to bend. In the feeding pipe, excessive bending of the wire should be avoided as much as possible.

3. ePA-GF is very easy to grind nozzles and extruder gears. It is recommended to use hardened steel nozzles or ruby nozzles. If conditions permit, you can choose hardened steel extruder gears. If the printing time is long, the throat and nozzles need to be replaced.

4. It is recommended to set the skirt to make it better for taking the model from the forming plate.