Anycubic Wash and Cure 3.0 Price in Sri Lanka

The Anycubic Wash & Cure 3.0 Machine is the perfect 2-in-1 solution for post-processing finished printed resin models. The powerful device with a cleaning capacity of 3 litres is the perfect addition to LCD 3D printers with a size of 7.3 inches or less.

Key Features:

• Larger all around for more capacity: Compared to its predecessor, Wash and Cure 2.0 , the successor version Wash & Cure 3.0 has a few changes:
  • The cleaning capacity has been doubled to 3 litres,
  • The total volume of the cleaning basket is now 4 litres,
  • The curing size has been increased by 15% to 160 x 180 mm to enable post-processing of larger models or multiple small objects in one pass.

• Flexicure Gooseneck Light design and new light source arrangement for more even curing: Using the Flexicure Gooseneck light design, the energy value is increased by 30,000 µW/cm² within an irradiation range of 1-3 cm. The LEDs and lens light source have also been arranged completely differently than the previous version, contributing to more even and thorough curing of otherwise difficult-to-reach areas.

• IPA saving design: Wash & Cure 3.0 impresses with a simple and minimalist design with two levels:
  • Basket cleaning mode (165 x 100 x 180 mm),
  • Hanging cleaning mode (165 x 100 x 165 mm).
  • A grey-tinted flip cover complements a pearl white housing. In contrast to the rust-prone metal basket of the previous version, the cleaning basket of the device is made of rust-resistant PP material. A matching cleaning bucket made of translucent PP material is also part of the contents of the delivery.

• User-friendly and quiet

The Wash & Cure 3.0 's user-friendly control panel offers three cleaning and curing modes: Wash, Cure and FlexiCure (curing with gooseneck light)The control panel is equipped with a touch button and a control button. Each of the modes can be selected with just a single click and can be continuously controlled using the rotary knob (1-30 minutes).

The device is tightly built and software-optimised to reduce noise during washing and curing. The maximum volume in operating mode is < 65>

Other features:

• UV blocking top cover (blocks more than 99.9% of UV radiation),
• Z-axis UV light with a wavelength of 405 nm and 10-piece UV lamp beads,
• Clear PP curing table.